|
|
Implementation of Fracture Liaison Service in the Czech Republic
VRABLÍKOVÁ, Květa
The main goal of the rigorous work was to verify the feasibility of implementing a coordinated care program for patients after osteoporotic fractures (so-called low traumatic fractures) of the so-called Fracture Liaison Services (FLS) system in the Czech Republic from the point of view of nurses' access. Sub-objectives of the quantitative research mapped the current status of adherence to procedures in the care of patients after low-traumatic fracture from the perspective of nurses, attitudes of nurses towards implementing FLS, and access to continuing education for the position of FLS coordinator. The sub-objectives of the qualitative research compared the development of care for osteoporotic patients in the Czech Republic between 2010 and 2019. They compared the situation in Lithuania, Romania, and Slovakia between 2010 and 2019.
|
|
|
The urban engineer and his role in construction practice
Tlamková, Anna ; Tichý, Jan (referee) ; Pavlovský, Tomáš (advisor)
The diploma thesis in its introductory descriptive part defines all the theoretical foundations and contexts associated with the concepts of urban engineering and urban engineer. The theoretical information is followed by the analytical part of the work, which contains interviews with real authorized urban engineers. With the help of the respondents' professional experience, the real role of the urban engineer in construction practice and the activities he should perform in such a role is subsequently formed. In the end, the obtained information is transformed into a practical example, which demonstrates the illustrative implementation of the knowledge of an urban engineer within the real functioning of the practice.
|
|
|
Impact of Communication Parameters on Energy Consumption of Zigbee Devices
Popelka, Jan ; Červenka, Vladimír (referee) ; Šimek, Milan (advisor)
This thesis deals with the energy research and design a simple wireless sensor networks. The data modules with ZigBee wireless communication technology. The main feature of wireless sensor networks is the minimal energy devices at low cost and maximum data reliability. Furthermore, the work describes firmware for communicating nodes with the ability to change parameters of data transmission and thus affect the energy consumption node. Calculations of energy consumption, compared with measured results and discharge characteristics of the battery packs are included in the final chapters of this work.
|
|
|
Wireless Security and Surveillance System
Výborný, Jiří ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
This Master’s thesis deals with design and construction of a wireless security and surveillance system in ZigBee wireless networks (IEEE802.15.4). The design consists of creating a star network topology with intended monitoring of home area via end device boards paired with coordinator board, which provides basic networking functionality. End device is used to send data from a temperature sensor DS1631 and magnetic reed switches to coordinator. ZigBee module ZDM-A1281-A2 made by MeshNetics company embedded on each board contains a micro controller ATMega1281 and a transceiver AT86RF230 working in a 2,4GHz frequency band. System is able to notice of any door or window move actions and too high temperature. The non-fully functional ZigBee stack, which is called an Open MAC software, based on MAC (Media Access Control ) layer and PHY (Physical) layer from MeshNetics, has been used to develop the user software. Open MAC consists of three application samples in C code. One of them was modified by the user for an application of communication between the module and sensors. The same design with module RC2204AT made by Radiocrafts company was tested as well, but it couldn’t be executed. All developed boards have been constructed and tested via Terminal PC program.
|
|
|
Administrative center Hodonin - building and technological project
Gaďurek, Robin ; Nečasová, Barbora (referee) ; Vlčková, Jitka Laura (advisor)
The content of the thesis is the implementation of the three-story brick office building with an operation in Hodonin. Text section contains the technical report on the structural and technological project technical report transport relations, study implementation of major technological stages of building SO 01, project construction site, the design of the main building machines and mechanisms, technological regulation, inspection and test plan and a plan of safety and health at work for making the 1st floor ceiling structure. The appendix section includes drawings and installations situation Minor main building structure, calculation of stripping reinforced concrete structures, timing and technology standard of the main building structure and time and financial plan construction-object.
|
|
|
DEVS Simulator Implementation in C++20
Šurina, Timotej ; Janoušek, Vladimír (referee) ; Peringer, Petr (advisor)
This master's thesis deals with the issue of modeling and simulation of systems based on the DEVS formalism. The result of this work is a library that is inspired by the adevs tool and based on the classical DEVS formalism. The library is implemented in the programming language C++20 and is supplemented by predefined models of components for creation of queueing systems. The library also contains a set of examples for use in teaching. In comparison with the paralel adevs tool it is less effective but it has simpler interface with focus on clarity, which is more important for teaching. The library also simplifies definition of models with the use of modules, intelligent pointers for memory management and the use of mentioned components.
|
|
|
Wireless Communication in Home Automation
Prokop, Michal ; Gutman, Jiří (referee) ; Hynčica, Ondřej (advisor)
This bachelor thesis is about how to make wireless communication network by IQRF technology which is intended for a home automation. It’s created by using DPA custom handler. This network can be made without programming thanks to DPA custom handler. This wireless network is realized by light model that is controlled by coordinator or by a button on a node. After that I measured latency and energy consumption on several various synchronous network and asynchronous network.
|
|
|
Lighting control system using a wireless communication network
Levek, Vladimír ; Kadlec, Jaroslav (referee) ; Kuchta, Radek (advisor)
The aim of this thesis is to create and describe the wireless system for lighting control. A part of the work is the creation of modules for switching lighting and the creation of their operating programs. The first chapter briefly describes the way how the lighting control works and contains general requirements for the intelligent home. Further, there is a description of IQRF system, which serves as a wireless platform for the system. Next part of the thesis describes individual modules in terms of hardware and software. One part of the work covers the description of the transmission protocol. The attachment includes a listing of all operating programs for this wireless control system.
|
|
|
Control unit for IRC system
Mališ, Martin ; Kučera, Pavel (referee) ; Macho, Tomáš (advisor)
This bacheleor’s thesis deals with design of control system for temperature regulation in family house. System is designed for individual room heating and consist of one control unit and several thermostatic units, which are situated all over the house. Control unit is central element of heating system and it uses ZigBee technology in comunication with thermostatic units
|
|
|
Wireless Sensor Networks Security
Nagy, Jan ; Trchalík, Roman (referee) ; Očenášek, Pavel (advisor)
This thesis deals with the security of wireless sensor networks, mainly of the industrial standard ZigBee. The aim of the work is to familiarize with the 802.15.4 standard and the ZigBee technology, especially with present methods of security in this field. I have also analysed the requirements for the security of this technology. Further aim of this work is the introduction of the ZigBee kit and description of the Microchip's ZigBee stack. Analysis of the stack is connected with practical test of security functions in the ZigBee laboratory.
|
guest ::
